Most of the sump pumps are featured with flood or water level alarms, normally battery packed, that alert you when the pump malfunctions and water backs up. The more advanced systems can call your mobile phone or report your alarm company once the water sets to rise. Luckily, this should not occur often as sump pumps, as a whole, are pretty reliable. However, as with any other essential piece of equipment, timely maintenance is always a better idea. You should consider spending few minutes once in the month, while heavy rains are expected and in early days of spring to make sure trouble-free sump pump function. Basic sump pump maintenance is normally as easier as doing these simple jobs. There are some tips available here if you want more info about complete guide of maintenance just click here to check it has unique reviews about sump pump
- Ensure that the pump is plugged into a properly working GFCI outlet and that the cord is in proper shape. In the damp regions, GFCI breakers would trip, shutting the sump pump off effectively. Make a periodic check on your sump pump so that you reset GFCI whenever necessary.
- Make sure that the pump stands upright by itself. Vibrations in between the operation can make it to drop or to tilt towards other side. This could mess up with the float arm making it unable to activate the pump.
- Try to remove the submersible pump physically from the pit and thoroughly clean the grate at the bottom part. The sucking function of the pump can attract in small stones towards the grate, blocking the inlet and eventually damaging the pump’s operation over the course of time.
- Make sure that the outlet pipes are joined together tightly and drained out a minimum twenty feet apart from the foundation.
- Ensure that the vent hole near the discharge pipe is cleared.
Though these are some valuable battery backup sump pump reviews that can help you to retain the proper functioning of your sump, check out the list below that discuss common issues with sump pump and solutions to resolve them.
- Debris on the sump basin- Check always to ensure that the sump pit is cleared from any kind of debris. The pit can even be filled up with water, assuring it starts and stops the pump as intended
- Examine the ‘check’ valve- The check valve can sometimes be installed improperly. Check valves are installed so that if the sump pump gets shut down, no water gets back into sump pump. The arrow of check valve must not be pointing at sump pump
- Make the weep hole dirt-free- Few pumps contain a weep hole, normally between the check valve and sump pump. This weep hole can be cleaned using a toothpick or other small object.
- Make sure the impeller is cleaned- Impeller is a small filter that can get clogged sometimes. When your sump pump is not working suddenly or producing a whining noise, this can be the issue. The impeller must be connected to sump pump using bolts and would require a proper cleaning for proper function.